AG electric heating wire shielded glassFull lamination is a high-end glass lamination technology that uses electric heating wire to completely bond two pieces of glass together, forming a new type of glass material with increased thickness, improved strength, better transparency, and better sound insulation. The glass is composed of two layers of AG electric heating wire shielded glass and one layer of explosion-proof film. The AG electric heating wire shielded glass is the main shielding layer, which can effectively shield external electromagnetic interference.
In addition, due to its explosion-proof performance, the glass can also be used in places where sensitive equipment needs to be protected.
The main characteristics of AG electric heating wire shielded glass are:
1. High shielding rate: The shielding rate of AG electric heating wire shielded glass must be high to ensure that it will not affect the equipment when subjected to electromagnetic interference.
2. Stable performance: The performance of AG electric heating wire shielded glass must be stable to ensure that there will be no failure or issues affecting its performance during use.
3. Environmental friendliness: The environmental friendliness of AG electric heating wire shielded glass must comply with environmental safety standards to ensure no harm to human health and the environment.
4. Customization capability: AG electric heating wire shielded glass needs to have customization capabilities to ensure it meets the needs of different application scenarios.
Advantages of AG Glass
1. Excellent shielding effect: The surface of AG glass utilizes nanotechnology to uniformly add silver nanoparticles to a special thin film, forming an efficient optical shielding grid. This structure can block the penetration of electronic radiation, reduce the harm of radiation to the human body, and effectively block UV light, protecting indoor items from sunburn.
2. High strength and toughness: AG laminated glass is made by bonding two single pieces of tempered glass through a special process, with a much higher degree of strengthening than ordinary tempered glass. It can effectively resist strong external impacts and better support the weight of large areas of glass, reducing the risk of deformation and cracking caused by factors such as wind pressure.
3. Good transparency: The surface of AG glass is treated with a special film with high adhesion, which can effectively eliminate the reflection phenomenon on the glass surface, making indoor and outdoor light passing through the glass softer and providing a more comfortable visual experience.
4. Sound insulation performance: After special treatment, AG glass material can isolate the propagation of external noise, reduce indoor noise interference, and create a comfortable living environment.
The production steps of AG glass
1. Cleaning the glass surface: First, use a professional cleaning agent to clean the glass surface, removing surface impurities and dirt.
2. Glass corner collision: Align two flat glass pieces with a required edge roughness of less than 0.5mm.
3. Strip type film material laying: Lay aluminum film strips with a width of 8mm on the surfaces of two pieces of glass, and then sandwich 1.8mm thick PVB into the film strips.
4. Bonding: Place two pieces of glass in a pressure plate and perform vacuum adsorption treatment to tightly bond them together. Then use electric heating wire technology to heat treat the glass until all the colloids in the PVB film material overflow into the gaps between the glasses.
5. Sorting: Finally, remove the laminated glass from the vacuum pressure plate, clean the surface, remove residual impurities and bubbles, and complete the final laminated glass production.
Application areas of AG glass
AG electric heating wire shielded glass full bonding technology is a high-end bonding technology mainly used in the fields of building curtain walls, office partition doors, indoor partitions, green greenhouse rooms, etc. Due to its advantages such as high sound insulation, high transparency, high strength, and high safety, AG glass is gradually moving towards industrial production and has become the preferred material for high-quality construction and home decoration in the new era.
In short,
AG electric heating wire shielded glassWhen making a choice, multiple factors need to be considered to ensure that its performance meets the requirements, as well as environmental friendliness, safety, and customization capabilities. When making a choice, it is necessary to choose and customize according to specific circumstances. At the same time, different application fields and scenarios have different requirements for AG electric heating wire shielded glass, and it needs to be selected and customized according to the actual situation.
If you encounter any difficult or complicated problems, please feel free to contact us:
en 
