Sheet type ultra thick foam copper is a thin film material manufactured by precise molding process

         Sheet type ultra thick foam copperIt is a new type of material that is a thin film material manufactured through precision molding processes. Due to its thickness exceeding 200 millimeters, it has extremely high mechanical strength and thermal insulation performance, and is widely used in fields such as construction, aerospace, and automotive.
Sheet type ultra thick foam copper has the following characteristics:
High strength: Sheet type ultra thick foam copper is made by fine molding process, so it has extremely high strength and wear resistance.
Excellent thermal insulation performance: sheet type ultra thick foam copper has excellent thermal insulation performance, which can effectively resist high temperature and high heat.
Environmental friendliness: the chip type ultra thick foam copper will not pollute the environment, and can be recycled to save resources.
Good portability: the chip type ultra thick foam copper is convenient to carry and can be used in various environments.
Application scenario: Sheet ultra thick foam copper is usually used in the fields of architecture, aerospace, automobile, etc. to improve the thermal insulation and heat preservation performance of buildings and vehicles.
Introduction to sheet super thick foam copper:
The sheet type ultra thick foam copper is made of high-quality and high-purity brass, which is melted, extruded, and then foamed on the surface to form a metal plate with thermal insulation and fire prevention functions with a thickness of 0.5~1.5mm. This material has the characteristics of light weight, high strength, and low thermal conductivity, which can replace traditional insulation materials and is suitable for external insulation of building exterior walls.

1. Environmental Protection: No pollution, no damage to the environment, belongs to green and environmentally friendly products, in line with China's sustainable development strategy;
2. Energy saving: Compared with traditional wall materials, its thermal conductivity K value is about 0.041Wm.k, which is about 30% lower than the thermal conductivity K value of polystyrene board. Therefore, it can more effectively maintain indoor temperature and achieve energy-saving goals;
3. Waterproof: Due to a closed cell rate of 95% and a water absorption rate of almost, it is a hydrophobic material that will not cause structural deformation due to moisture absorption or water seepage. At the same time, it also has good sound insulation;
4. Sound insulation: With the same insulation effect, using a thinner thickness (such as around 100mm) can provide better sound insulation;
5. Construction is simple: simply paste the dedicated bonding mortar directly onto the wall surface;
6. Cost effectiveness: Low production cost, lower price than ordinary extruded polystyrene board;
7. Service life: greater than 50 years;
8. Weather resistance: It can maintain good physical properties in high or low temperature environments and is not easy to crack;
Scope of application:
1. Thermal insulation of cold and hot pipelines and hidden exposed pipelines inside buildings;
2. Various industrial pipelines and equipment, such as oil pipelines, chemical, power, steam, etc;
3. Insulation and thermal insulation of refrigerated trucks and cold storage facilities;