Widely used in conductive bonding, fixing, shielding and sealing of electronic and electrical products. Room temperature natural dry sealing adhesive conductive adhesive

Sealing adhesive conductive adhesiveseries

1、 Product Introduction

This product is highly efficientConductive adhesiveSingle component (no need to mix), natural curing at room temperature, easy to operate. Using imported raw materials, it has excellent conductivity and physical properties, and has strong adhesion to most metals and non metals. Widely used in conductive bonding, fixing, shielding and sealing of electronic and electrical products.

2、 Physical characteristics

3、 Usage method

1. If there are stains on the surface, please clean the adhered surface with a cleaning agent first;

2. After the cleaning agent evaporates completely, evenly apply adhesive to one of the bonded surfaces and achieve complete coating, then bond it to the other bonded surface.

4、 Precautions

1. The remaining product after use must be tightly sealed and stored in a cool place.

2. This product requires complete curing to achieve optimal conductivity and adhesion, and the complete curing time depends on the thickness of the adhesive used. Generally, complete curing takes 24 hours.

3. According to the actual process usage, our company's specialized diluent can be added in moderation for dilution, and excessive dilution is not allowed to avoid affecting the conductivity and bonding effect.

5、 Packaging and storage conditions

This product is usually packaged in a 100g/tube toothpaste tube and should be sealed and stored in a cool, dry place. It can be stored at room temperature for 6 months without refrigeration.

Note:

The information contained in this article is considered reliable by our company, and the data in the product description is non factory standard values. The recorded content, product performance improvements, product specifications, etc. may change without prior notice.

Our company only guarantees whether the product meets the specifications. Due to the different usage conditions of customers and the fact that the storage, transportation, and construction process of the product are not controlled by our company, customers must conduct testing before use to confirm that the product is suitable for their intended use.