Thermal conductive silicone sheets have been widely used in computer hosts, laptops, LED lighting fixtures, set-top boxes, routers DVD、 The electronic and electrical industry that requires filling and cooling modules for new energy vehicles, power supplies, transformers, etc. What are the installation steps and usage methods for thermal conductive silicone gaskets?
Firstly: Maintain
Thermal conductive silicone heat sinkThe surface should be clean and free from dirt or dust. If there is dirt or dust, it will increase the thermal resistance of the thermal conductive silicone film, thereby reducing its heat dissipation effect.
Second: Hand held
CPU thermal conductive silicone sheetWhen it comes to large areas of thermal conductive silicon film, it should be grabbed from the center, while smaller areas can be gently grabbed by hand and then gently attached to the interface. This step is very important because if you take it and stick it on the interface casually, it is easy to break the material, which is not worth the loss. The material cannot truly play its role.
Thirdly, hold (hold) the thermal conductive silicone film sheet with your left hand, and tear off one side of the release protective film with your right hand. Do not tear off both sides of the protective film at the same time to reduce the number and area of direct contact with the thermal conductive silicone film, and maintain the self-adhesive and thermal conductivity of the thermal conductive silicone film without damage.
Fourthly, after removing one side of the release film, align the thermal conductive silicone film with the position of the heat sink facing the removed side, and seamlessly adhere it between the interfaces.
Fifth: After placing one side of the thermal conductive silicone sheet on the radiator, gently tear off the other layer of release paper with your hand, while also paying attention to moderate and slow force.
Sixth: After pasting, apply a certain amount of pressure to the heat sink, which can fix the thermal conductive silicone film firmly and bond it more evenly, resulting in better heat dissipation effect. After tightening or using strong adhesive thermal conductive silicone film, apply a certain pressure to the radiator and store it for a period of time to ensure that the thermal conductive silicone film is fixed properly.
The correct installation method of the thermal conductive silicone sheet mentioned above has been introduced by the thermal conductive silicone gasket manufacturer. The correct installation method of the thermal conductive silicone sheet is actually very simple, and the most important thing is to be patient. You can refer to it in practical operation. At the same time, you should constantly summarize your experience in the actual operation process, which is conducive to improving operational efficiency and ensuring the performance of the thermal conductive silicone sheet. We also hope that you can summarize new experience and share it.
High performance thermal conductive silicone sheetYB-P110 Product Parameter Table:
| specifications |
unit |
YB-P110 |
Method |
| Reinforcement Carrier |
|
- |
|
| Inherent Surface Tack (1-/2-sided) |
|
2-side |
|
| Color Color |
|
Gray |
visual |
| Thickness |
mm |
1.0~5.0 |
ASTM D374 |
| Specific Gravity Density |
g/cm3 |
3.2 |
ASTM D792 |
| Hardness (1.0mT~1.5mmT)
|
Shore 00 |
80 |
ASTM D2240 |
| Hardness (>1.5mmT)
|
Shore 00 |
60 |
ASTM D2240 |
| Thermal Conductivity |
W/mK |
11.0 |
ASTM D5470 |
| Volume Resistance |
Ωcm |
>1013 |
ASTM D257 |
| Breakdown voltage |
KV/mm |
>10 |
ASTM D149 |
| Application temperature |
℃ |
-60~200 |
|
| Tensile strength |
psi |
＜10 |
ASTM D149 |
| Elongation rate |
% |
<10 |
ASTM D149 |
| Low molecular weight siloxane content Siloxane Volatile D4~D20 |
% |
<0.01 |
GC-FID |
| Flame retardancy |
UL94 |
V-0 |
UL94 |
en 
