Copper foil tape is divided into single conductive copper foil tape and double conductive copper foil tape

Product specifications:

Copper foil tape is divided intoSingle conductive copper foil tapeAnd double conductive copper foil tape:

Single conductive copper foil tape refers to the adhesive surface that is non-conductive, with only the other side of copper conducting, hence it is called single conductive or single-sided conductive;

Double conductive copper foil tape refers to the conductive surface covered with adhesive, and the other side of copper itself is also conductive, so it is called double conductive or double-sided conductive.

Product performance:

One side of the product is copper foil, and the other side is insulation paper; The middle is made of imported acrylic pressure-sensitive adhesive.

Has extremely strong adhesion and elongation. Mainly due to the excellent conductivity of copper foil, it plays a conductive role during the reuse process; Secondly, shielding requires the conductive material "nickel" on the adhesive surface of copper foil tape to achieve magnetic shielding.

Product Usage:

Suitable for electromagnetic shielding in various electronic products such as transformers, mobile phones, computers, PDAs, PDPs, LCD displays, laptops, copiers, etc.

Advantages of use:

The purity of copper foil is higher than 99.95%, and its function is to eliminate electromagnetic (EMI) interference, isolate the harm of electromagnetic waves to the human body, and avoid the impact of unnecessary voltage and current on its function.

In addition, it has a good effect on static discharge after grounding. Strong adhesion and good conductivity, can be cut into various specifications according to customer requirements.

Characteristics of copper foil tape:

Note: 1. Can be used below 100 ℃

2. The elongation rate is generally around 5%, depending on customer requirements.

3. It should be stored in a cool place at room temperature and has a shelf life of one year.

4. When using, the surface of the adhered object should be kept clean to avoid repeated use.