One component high-temperature resistant epoxy adhesive is a heat cured, high-temperature resistant one component epoxy resin adhesive

Single component high-temperature resistant epoxy adhesiveA single component epoxy resin adhesive that is heat cured and resistant to high temperatures; And it needs to be stored at low temperature, with high bonding strength after curing, long-term high temperature resistance of 200-250 ℃, instant resistance (400 ℃), impact resistance, vibration resistance, and good acid and alkali resistance.

Scope of application: Suitable for bonding and sealing various high-temperature resistant products, with excellent bonding strength at high temperatures.

Structural bonding, repair, and packaging in high-temperature environments. Product features:

Good waterproof performance

High temperature resistance of 400 ° C

Impact resistance

Good resilience

Application industry:

Used for electronic module packaging, chip protection and confidentiality, diamond high-speed grinding tool body, and high-temperature mold casting materials.

Before using single component epoxy adhesive, the parts that need to be bonded and fixed must be kept dry and clean; Remove loose substances on the surface of the substrate, use sandblasting, electric grinding wheel, wire brush or coarse sandpaper to polish, improve the surface roughness, and wipe with cleaning agent to clean the surface and enhance the adhesion.

If JL-6103 high-temperature resistant single component epoxy adhesive is stored in a frozen environment, it needs to be removed and thawed at room temperature before use.

During the glue application process, it is advisable to avoid placing the glue solution in a high-temperature environment to reduce the viscosity of the gel, unless this has been tested and proven feasible beforehand.

During the curing process, if too much glue is applied or the temperature is too high, bubbles may form. In such cases, please lower the curing temperature appropriately.

High temperature resistant single component epoxy resin adhesive is a chemical product that reacts only when heated. Therefore, environmental temperature has a significant impact on product quality. Please store the product in a low-temperature environment to ensure its stability and quality. If not stored at low temperatures, the product is prone to flow or a decrease in adhesive strength during use

If the colloid is not used up after removal, please seal it tightly in a timely manner and store it again in a frozen environment;

A very small number of people may experience mild skin allergies and itching when exposed to adhesive for a long time. It is recommended to wear protective gloves when using it. If it sticks to the skin, please wipe it off with a cloth, towel, or alcohol, and wash it dry with soapy water.

Before using in large quantities, please try the product in small quantities to master the usage skills and avoid errors.