Specialized silver palladium, ruthenium based, and gold paste electronic pastes, stainless steel substrate electronic pastes, thermistor pastes

What are the varieties of resistor paste

Complete variety, divided into dielectric paste, resistor paste, and conductor paste according to different purposes; ceramic substrate, polymer substrate, glass substrate, metal insulation substrate, electronic paste, etc. according to substrate types; According to different sintering temperatures, electronic pastes can be divided into high temperature, medium temperature, and low temperature drying; According to different purposes, it can be divided into general electronic pastes, general thick film circuit making and specialized electronic pastes, stainless steel substrate electronic pastes, thermistor pastes; Divided by the price of conductive phasePrecious metal electronic pasteSilver palladium, ruthenium, gold paste, and other base metal electronic pastes, as well as molybdenum manganese paste.

Main characteristics of resistor paste

1. The shrinkage rate of tungsten slurry is consistent with that of ceramics, and the bonding strength between sintering and ceramics is good.

The thickness of the tungsten slurry coating after sintering is about 0.0127mm.

3. Tungsten paste can meet the process requirements of printing and small hole filling.

4. The size of metal particles in tungsten slurry can be controlled within 2 microns, with good dispersibility.

5. The viscosity of tungsten paste can be adjusted according to specific customer requirements.

6. Suitable for high temperatures ranging from 1300 ℃ to 1700 ℃.

resistor pasteThe application

Molybdenum manganese paste is a printable thick film conductor paste that can be used as a surface conductor layer for aluminum nitride, silicon nitride, beryllium oxide, and aluminum oxide substrates.

The size of metal particles in molybdenum manganese slurry can be controlled within 2 microns.

The thickness of the molybdenum manganese slurry coating after sintering is about 0.0127mm.

3. Viscosity can be adjusted according to specific customer requirements.

4. Suitable for high temperatures ranging from 1300 ℃ to 1580 ℃.

These two slurries are suitable for various specifications of alumina ceramics in China.