Ultra soft thermal conductive silicone sheet (silicone resin)

LBD-GPS10030 Double sided adhesive physical performance test Double sided adhesive physical performance test
Project project	Unit unit	Standard standard		Test data	Testing method
Exterior appearance		The adhesive tape is in roll shape, the surface is flat, the color is uniform, the two sides are flat without creases, and the stains of overflowing glue are significantly deformed, etc. The adhesive tape has a rolled shape, a flat surface, uniform color, flat sides without creases, significant deformation of overflow color spots, and other defects		Meet the requirements	Visual inspection
Unwinding and peeling unwinding and peeling		No glue is allowed to separate from the PET film No glue is allowed to separate from PET film		Meet the requirements	Visual inspection
Thickness thickness	U	100±5		95	GB-7125-1986
Connector connector	individual	≤1		None (no)	Visual inspection
Glue width coating width	mm	≥1030		1030	Tape measure
Initial viscosity	Steel ball number (#)	≥16		20	GB-4852-1984
Sticky stickiness	H/25mm	≥6		10	GB-4851-1998
Peel strength at 180 °	N/25mm	≥10		13	GB-2792-1998
Test Conditions		Temperature: 23 ± 2 ℃	Relative humidity: 60 ± 5 ℃

Precautions:
The recorded data is only one example of the measured value and is not a guaranteed value;
Before use, it is necessary for your company to conduct pre testing regarding suitability and safety for the intended use. Please confirm that all responsibilities are borne by your company.

Made in Germany, imported material, super soft thermal conductive silicone sheet (silicone resin), thermal conductivity of 3W, suitable for large gaps
 

Imported material, ultra soft thermal conductive silicone film (silicone resin), thermal conductivity of 3W, suitable for larger gaps