Electromagnetic absorbing materials on PCB labels

Advanced Institute Technology Series Electromagnetic absorbing materialsIt can cut any electromagnetic wave noise surrounding consumer electronic devices, such as electromagnetic waves/harmonic noise/crosstalk, that occurs on PCB labels. Non conductive PSA is better used for insulation separation and easier/more reliable installation. As needed, metal film and conductive fiber adhesive tape can be used for attachment to provide complete shielding performance for special use. The soft release paper on the back makes it easier to use and cut.

Series Series	YB-2004L Series Absorbing Material LBD-1004L Series Absorbing Material
Frequency Range	Covering a wide frequency band of 10MHz-10GHz
Standard thickness (mm)	0.1mm, 0.15mm, 0.2mm, 0.25mm, 0.3mm, 0.5mm, 1.0mm, In accordance with the customer's Select thickness based on the frequency band used by the customer
Operating temperature (℃)	-30~85℃
Permeability (at 1MHz)	50
Surface resistance (Ω/□)	≥108
Density (g/cm3)	3.6
Dielectric strength (DC)	400V
Tensile strength (Mpa)	≥5.0
Thermal conductivity (W/m.k)	1.0 W/m.k
Environmentally corresponding	Halogen free, RoHS halogen-free, compliant with RoHS

Precautions:
The recorded data is only one example of the measured value and is not a guaranteed value;
Before use, it is necessary for your company to conduct a pre test on the suitability and safety for the intended use. Please confirm that all responsibilities are borne by your company.