Single component high-temperature resistant 200 ℃ epoxy adhesive, thermosetting, thermally conductive, high-temperature resistant, ultra-high strength adhesive

[Product Features]

This product is a one component adhesive that is heat cured, has good thixotropy, and is not easy to flow;

Heating and curing are required, and low-temperature storage is necessary;

After curing, it has strong toughness, high bonding strength, impact resistance, and vibration resistance at the bonding site;

The cured material has good acid and alkali resistance, excellent moisture, water, oil, and dust resistance, and is resistant to moisture, heat, and atmospheric aging;

The cured material has good electrical and physical properties such as insulation, compression resistance, and high adhesive strength.
[Scope of Application]

Recommended for adhesive fixation of motor rotor neck and motor winding joints;

It can also be used for bonding and fixing electronic components, handicrafts, and gifts. It has excellent bonding strength for packaging and bonding between metals, ceramics, glass, fiber products, and hard plastics;

Instructions for use

The parts to be bonded and fixed need to be kept dry and clean;

If the glue is stored in a frozen environment, it must be removed and thawed at room temperature before use;

During the glue application process; It should be avoided to place the adhesive solution in a high-temperature environment to reduce its viscosity, unless such tests have been conducted in advance and proven feasible;

During the curing process, if too much glue is applied or the temperature is too high, bubbles may form. In such cases, please lower the curing temperature appropriately.
【 Precautions 】

Due to the fact that this product is a chemical product that reacts when heated, the environmental temperature has a significant impact on the quality of the product. Please store the product in a low-temperature environment to ensure its stability and quality. If not stored at low temperatures, the product is prone to adhesive flow or a decrease in bonding strength during use;

If the colloid is not used up after being taken out, please seal it tightly in a timely manner and store it in a frozen environment again;

A very small number of people may experience mild skin allergies and itching when exposed to adhesive solution for a long time. It is recommended to wear protective gloves when using it. If it sticks to the skin, please wipe it off with acetone or alcohol and clean it with a cleaning agent;

Before using in large quantities, please try the product in small quantities to master the usage skills and avoid errors.

[Storage and Packaging]

This product needs to be stored in a sealed, cool, and dry place at low temperature. If it passes the test after expiration, it can continue to be used;

● Shelf life: 6 months at -5 ℃
The packaging specifications are: 1kg/can or 5kg/can.