en 
Wechat QRcode
Hotline:0755-22277778
Tel：0755-22277778
Mobile：13826586185（Mr.Duan）
Fax：0755-22277776
E-mail：duanlian@xianjinyuan.cn
Product Specification/Specification Slurry Calculator ComputerProfessional conductive adhesive
| Product/product: |
Heating paste Heating paste |
| Part number/Part number: |
XJY081 |
Scope of application:
This resistor paste is suitable for use in thick film circuits, ceramic substrates, and other substrates. This material can be printed, applied, and has product characteristics such as low sintering temperature and low cost. It is an ideal material for post mold heating products.
Usage conditions/Operating conditions:
| base material Substrate |
Aluminum oxide, ceramics, glass and other substrates Alumina ceramic, glass |
| Printing |
100-150 mesh screen printing 100-150 mesh stainless screen |
| leveling Levelling |
5-15min minutes at room temperature Level at room temperature for 5-15 minutes (depending on the actual leveling situation). |
| dry Drying |
Bake in a ventilated oven at 100-150 ℃ for 10-15 minutes (baking temperature below 230 ℃) 100-150℃，10-15 min |
| sinter Firing Condition |
Tunnel furnace air sintering, peak temperature 600~650 ℃ (recommended value), peak time 10 minutes. Tunnel furnace sintering atmosphere, the peak of 600~650℃ (recommended), at peak of 10minutes. |
| thinner Thinner |
STY1 |
2. Characteristics after sintering:
Under the sintering conditions of 1), the film thickness of 8-12mm was checked and the fired film was produced under the conditions specified in 1), (Film thickness is 8-12mm.)
| Characteristic |
Standard |
Test method and conditions |
|
| 1 |
Fineness |
≤8μm |
FOG test |
| 2 |
Viscosity |
100-200Pa.s |
Brookfeild HBT utility cup and spindle (SC4-14/6R), 10rpm, 25±1℃ |
| 3 |
Appearance |
Black |
Eyeballing |
| 4 |
Square resistance value |
80 ohms |
Different square resistance values can be achieved through screen mesh size and printing thickness |
Storage conditions and term of validity
The product should be stored in a sealed environment at a temperature of 5-25 ℃, with a shelf life of six months from the date of shipment.
Packaging method:
1000g/can, 1000g/can
Advanced Institute (Shenzhen) Technology Co., Ltd， © two thousand and twenty-onewww.avanzado.cn. All rights reservedGuangdong ICP No. 2021051947-1 © two thousand and twenty-onewww.xianjinyuan.cn. All rights reservedGuangdong ICP No. 2021051947-2