Application of Conductive Silver Paste and Conductive Silver Adhesive XJY-YB16 in Sensor Preparation

Electric silver paste conductive silver adhesive XJY-YB16 wholesale direct supply

Product Introduction

Advanced Institute of Conductive Adhesive (Shenzhen) Technology Co., LtdA low-temperature rapid curing single component producedEpoxy conductive adhesiveIt is composed of conductive metal powder and epoxy resin adhesive that can cure at high temperatures, and is suitable for conductive connections of various electronic components.

Typical applications

Conductive connections of electronic components, dispensing of keyboard LEDs, printed circuits, fingerprint recognition, etc.

General characteristics

This product can cure in 5 minutes at a medium temperature of 150 ℃, with fast curing speed, high bonding strength, low electrical resistivity, and recommended dispensing needle diameter of 0.2-0.5 millimeters.

TECHNICAL INDEX

Instructions and guidance for use

A) Preparation work

1. Before opening the lidConductive adhesiveRemove from the freezer and place at room temperature (around 25 ℃) for at least one hour; When opening the lid, be sure to avoid water droplets from seeping into the glue outside the container, as there may be air leaks and frost on the inner wall of the container, which can cause water vapor or water droplets to enter and affect its characteristics;

2. Viscosity adjustment: Do not adjust the viscosity as the addition of any solvent may affect its properties;

B) Use

Recommend using a precision dispensing machine. For example: dispensing machine, needle: NO.23C (inner diameter 0.4mm); Air pressure: 1-2 × 10-1pa (1-2kg/cm2).

C) Operation guidance

1. Glue must maintain sufficient wetting ability with the bonding surface to ensure sufficient adhesion.

2Conductive silver adhesiveAfter use, tightly seal the lid and store in a -40 ℃ freezer.

Storage conditions and shelf life

-40 ℃, away from light, shelf life>4 months; Room temperature 25 ℃, away from light, for more than 24 hours. Without avoiding light, the shelf life and usage time will be shortened by 10-30%.

Packaging method

Plastic bottles: 50G, 200G, 500g/dispensing syringe: 5ML, 15ML, 30ML.

The label is marked with the factory name, product name, model, production batch number, and weight.

Safety operation standards

Carefully read the product instructions, preventive measures, and first aid measures before use; If this product comes into contact with the skin, it should be promptly washed with water and soap.